DUCATI Recalls

2024–2025 DUCATI PANIGALE V4 7G | STREETFIGHTER V4 3G

Due to a manufacturing defect, the rear brake hose could be susceptible to heat damage and may result in a sudden loss of rear braking performance. The front brake will continue to function as expected.

2025 DUCATI Panigale V2 896 & Streetfighter V2 896

The Antilock Brake System (ABS) fuses/and or fuse box holders, may have been incorrectly installed during the wiring assembly. As a result, the ABS unit may not be adequately protected, and the fuse could blow deactivating the ABS system while braking. If this occurs during a hard braking situation, the ABS will not function, and the front and/or rear wheel may lock, potentially leading to a loss of vehicle control. Note: The ABS warning light will appear on the instrument cluster to alert the rider that the ABS function is no longer available.

2018–2024 DUCATI PANIGALE V4 | STREETFIGHTER V4

The rear wheel shaft could lose its structural integrity and, in extreme cases, break whilst riding.

2024 DUCATI PANIGALE V4 7G

Due to a manufacturing defect, the rear brake hose could be susceptible to heat damage and may result in a sudden loss of rear braking performance. The front brake will continue to function as expected.

2016–2022 DUCATI XDiavel

The passenger backrest may become loose and break if it has been incorrectly installed and/or if the passenger uses it in contravention of the manufacturer’s information for use.

2017–2020 DUCATI X DIAVEL

The side stand mounting bracket spring retaining pin may break. This could cause the side stand to open whilst riding and the stand sensor to switch off the engine, resulting in a loss of motive power.

2020–2023 DUCATI PANIGALE V2

Due to a software issue, the daytime running lamps and automatic operation of the headlights may not operate as intended. This could result in reduced or poor visibility.

2016–2018 DUCATI HYPERMOTARD 939 STD, HYPERMOTARD 939 SP & HYPERSTRADA 939

Due to a manufacturing defect, the engine oil cooler lines may become damaged due to a contact point with the two cooler lines and may cause an oil leak. If this occurs, oil may leak onto the road and come in contact with the rear tyre. This could result in a loss of vehicle control.

2019 DUCATI HYPERMOTARD 950 SP Hypermotard 950 SP

The side stand mounting bracket may become damaged over time and fail when the motorcycle is parked.

2014–2020 DUCATI Monster Monster 1200 (MA), Monster 1200 R (MA), Monster 1200 S (MA), Monster 821 (M6), Monster 821 (MH)

The rear brake hoses may not meet manufacturing specifications and could be susceptible to heat damage, which may result in a sudden loss of rear braking performance. The front brake will continue to function as expected.

2021 DUCATI MULTISTRADA V4

The motorcycle's engine valve guides may experience excessive, premature wear, and become damaged over time.

2018–2021 DUCATI SCRAMBLER 1100

Due to improper manufacture, an exhaust cable may come into contact with the battery positive cable.

2016–2019 DUCATI XDIAVEL

The motorcycle's side stand mounting bracket may become damaged over time. The side stand may fail when the motorcycle is parked.

2017–2018 DUCATI 1299 SUPERLEGGERA

Due to an improper manufacturing process, the front brake pad material may separate from the brake pad.

2018 DUCATI MULTISTRADA

Due to an improper manufacturing process, the vehicle side stand may break.

2018–2020 DUCATI HYPERMOTARD 950

Due to improper assembly, the battery's negative cable terminal may break.

2013–2018 DUCATI SUPERLEGGERA, PANIGALE R

The engine oil breather system may operate incorrectly, possibly resulting in an oil leak from the air intake breather tube.

2018–2019 DUCATI PANIGALE

The fuel tank ventilation system may be defective and cause pressure to build in the tank, resulting in fuel potentially spraying out of the tank when the fuel cap is opened.

2016–2019 DUCATI MONSTER 821, MONSTER 1200 & SUPERSPORT

There is a potential problem with the gear shift lever due to an error in the manufacturing process.

2018–1970 DUCATI PANIGALE V4

There is the possibility for engine oil to leak from one of the hydraulic tensioner's on each of the cylinder heads on the engine.

2018 DUCATI PANIGALE V4/V4S

There is the potential for a failure of the delivery oil line fitting on the engine oil cooler resulting in an oil leak from the oil cooler component.

2017–2018 DUCATI HYPERMOTARD 939, PANIGALE 959, 1299, PANIGALE V4

The brake pad may separate from the backing plate.

2016–2018 DUCATI SUPERSPORT

Hoses may melt in the bike lower left area (under the battery) due to interference of the fuel tank and air box drain hoses with the horizontal cylinder exhaust manifold.

0 DUCATI PANIGALE V4

A fuel leak may occur from the filler plug (when opening it) or from the area under the rider seat both when riding the bike or when it is parked, due to a problem with the fuel tank seal and ventilation system.

2014–2018 DUCATI VARIOUS MODELS

The floating piston in the Brembo front brake radial master cylinder of certain Ducati models is made from polyphenylene sulfide (PPS), which may crack when stressed. Stressors include track use, frequent use of the ABS system or the motorcycle falling.

0 DUCATI MULTISTRADA

An intensive off-road use of the motorcycle could result in a breakage of the lower eyelet of the rear shock absorber, causing the rear shock to become loose from its mounting point.

2014–2017 DUCATI SCRAMBLER & SCRAMBLER SIXTY2

The fastening pivot of the side stand may become slack.

0 DUCATI XDIAVEL

Possible loosening of the front retaining nut of the drive belt drive pulley. Possible loosening of one of the side stand retaining screws.

2013–2014 DUCATI 1100 SUPERLEGGERA

Due to a potential fault in the clutch assembly, one of the clutch components may break, increasing the risk of rear wheel lock up during use of the bike.

2015–2016 DUCATI Xdiavel

It is possible that the rear wheel rim might have been installed in the wrong way, with the 4 rear wheel shaft driving pins inserted in the slots rather than in the 4 relevant holes.

2014–2016 DUCATI Multistrada 1200 and 1200S

The side stand for supporting the parked motorcycle in an upright position could break at the joining weld.

2013–2015 DUCATI Ducati 1199/1299 Panigale S

The internal nut retaining the piston to the rod might not be tightened to the specified torque.

2009–2014 DUCATI MULTISTRADA

The hose inside the sheath of the throttle opening Bowden cable may get stuck inside the throttle control, resulting in stiffening or locking of the throttle control assembly.

2010–2014 DUCATI DIAVEL Series

The license plate holder subframe may develop cracks over time.

2011–2013 DUCATI 1199 PANIGALE

Due to overheating, the indicators may function incorrectly.

0 DUCATI Panigale MY2013 Motorcycles

Rear fork fastening bolts: The bolts may come loose during operation with extended use. Front Brake Reservoir Connecting Tubes: After extended rubbing against the reservoir retaining screw, the connection tube could wear out and produce a slight fluid leak.

0 DUCATI 1199 Panigale

The following defects may occur: Exhaust Valve Bowden Cable Heat Protector: Under extreme conditions, the plastic protector could melt or burn, producing smoke and noxious fumes. Steering Damper Retaining Screws and Ball Joint: Under extreme conditions and after heavy wear, the steering damper may come loose. Rear Fork Fastening Bolts: The bolts need re-tightening to new factory torque standards. Front Brake Reservoir Connecting Tubes: After extended rubbing against the reservoir retaining screw, the connection tube could wear out and produce a slight fluid leak.

2012–2013 DUCATI Diavel

The side-stand of the motorcycle may bend, and under extreme circumstances, break in the area near the rotation pivot.

0 DUCATI 1199 Panigale

Some motorcycles may have been fitted with the incorrect retaining bolt linking the swingarm to the rear suspension linkage rod.

0 DUCATI M1100, M796, 848, F848

Due to to use of inferior brake-pad material, the rear brake may not function adequately under heavy braking.

2011–2012 DUCATI Monster 1100EVO

The rear wheel of the motorcycle may develop structural problems due to a non-conformity with the fabrication standards.

2010–2012 DUCATI Monster and Hypermotard

There is a possible non-conformity in the fuel system line that could cause fuel leakage.

2010–2011 DUCATI Diavel, Diavel Carbon

The side stand may bend or break under heavy load while the bike is resting on it.

2010–2011 DUCATI Diavel, Diavel Carbon

In some cases there is a possibility of having the mounting bolts of the number plate holder coming loose.

2009–2011 DUCATI MTS 1200, Diavel

Under some special conditions of use, upon instrument panel switch-on, the hands free control unit could cause the failed disengagement of the electronic steering lock.

2009–2010 DUCATI MTS 1200

In certain conditions (downshifting or manoeuvring with the clutch disengaged with the engine at idle) it is possible that the engine may stall.

0 DUCATI D16RR

Inspection and possible modification of the seat tail guard. This modification is indispensable to ensure that the seat tail guard is a sufficient distance from the exhaust system.

0 DUCATI 1198S, 1098R, 1098R Bayliss

The Ohlins RH front fork leg may feature a flaw, which could result in safety problems, especially in case of misuse of the motorcycle.

0 DUCATI 848, 1198/S, 1098R Bayliss

Fuel leakage from fuel line at the injector end

0 DUCATI Tricolore 1098, 1098 S, 1098

Inspection and possible replacement of the final drive sprocket to ensure the final drive sprocket has not developed cracks which could fracture the socket causing it to fail.

0 DUCATI Hypermotard 1100 & 1100 S

Failure of the number plate holder support.

0 DUCATI 1098, 1098 S, 1098 Tricolore

Engine stalls at idle, which could endanger rider safety. Problem to be fixed by downloading new software to the engine control unit.

0 DUCATI Hypermotard 1100

The battery can move in its housing in the fuel tank and this could result in main wiring harness cables damage at the battery terminals.

2006–2007 DUCATI SBK 1098

Replacement of two of the engine timing belt tensioners.

0 DUCATI Sports Classic

Fuel hose comes off at fuel pump end.

0 DUCATI Multistrada 1000

Need to replace oil cooler delivery hoses as, if the oil cooler hoses were to fracture they could leak oil that may affect the rear tyre and endanger rider saftey.

0 DUCATI 999/S/R/R Fila, 749/S

Inspection and/or replacement of the oil cooler to ensure that correct oil cooling unit has been fitted to the motorcycle. This inspection is indispensable, as, if the oil cooler were to fail, it could leak oil on to the rear tyre, endangering rider safety.

0 DUCATI 999, 749S

The front brake hose may become restricted between the front fork lower yoke and the steering lock peg, which could endanger rider safety whilst the vehicle is cornering.

0 DUCATI MHe 900

The gasket located between the fuel tank and fuel pump flange could leak. With a fuel leak and a source of ignition there is a risk of fire.

0 DUCATI Monster 900ie, S4, SS900, SS750

The fuel lines located between the fuel tank and the pressure regulator could degrade and endanger rider safety.

0 DUCATI 748,916,996

The mounting brackets could fracture or break, which could result in a loss of steering and control of the motorcycle compromising the rider's safety.

0 DUCATI 748, 916

Cracks Or Other Defects Could Exist In The Rear Axles Which Could Lead To Possible Failure.

0 DUCATI 900SL, 900SS

The Forward Linkage Rod Front Mount Bolt Is Of An Insufficient Length And May Become Insecure.

0 DUCATI ST2

Due To The Materials Used In Manufacturing The Front Chain Drive Sprocket Locking Plate, It Can Possibly Wear Causing The Locking Function Of The Plate To Fail And No Longer Lock The Drive Sprocket In Position.

0 DUCATI 600, 900

The Fuel Line Between The Fuel Tank And Fuel Filter May Operate Incorrectly And Restrict Fuel Flow To The Engine.

0 DUCATI 748, 916

Possible Lack Of Lubrication During Assembly Of The Rear Axle Roller Bearing Which May Cause A Failure Of This Component.

0 DUCATI 748, 916, ST2

A Fuel Line Inside The Fuel Tank May Operate Incorrectly And Restrict Fuel Flow To The Engine.

0 DUCATI 600, 750, 900

Potential Failure Of The Handlebars. The Original Handlebars Will Be Replaced By An Improved Re-design Handlebar.

0 DUCATI 916S1

Possible Failure Of The Rear Axle Spindle.

0 DUCATI 916S-S1, 748S-S1

Lubrication Procedure Necesssary To Ensure The Correct Operation Of The Throttle Linkage Throughout All Throttle Positions.

0 DUCATI 716S, 716S1, 748S, 748S1

The Headlamp May Not Meet The Requirements Of The Australian Design Rules (adr 19/01).

0 DUCATI 916S, 916SI, 748S, 748SI

Possible Incorrect Operation Of The Throttle Cable Could Prevent The Engine Returning To The Normal Idle Position.

0 DUCATI 916S, 96SI

Possible Failure Of Side Stand Spring Retaining Plate.

0 DUCATI 900M

Possible Incorrect Positioning Of The Front Brake Hoses During Manufacture Which May Cause Interfeence With The Front Mudguard Resulting In Wear Of Hoses.

0 DUCATI ZDM906SC

The Rear Suspension Swingarm May Crack During Use Causing The Rear Suspension To Collapse.

0 DUCATI ZDM906SC

The Rear Suspension Swingarm May Crack During Use Causing The Rear Suspension To Collapse.

0 DUCATI ZDM750 Motorcycle

Swing Arms Need Replacement On Ducati Zdm750 Motorcycles.